Позвоните нам!
введите код - получите скидку

Седельный Клапан Mixproof Seat Lift

Доставка по Москве и МО бесплатная

Оплата наличными при получении или удобным для вас способом:

Привезем гарантийный талон, товарный и кассовый чеки

Гарантийное обслуживание в авторизованных сервисных центрах

 

Применение

The Mixproof valve is a completely hygienic double sealing valve.
This system allows for the simultaneous processes in the two bodies of the valve by providing interface between the two fluids, preventing the possibility of product contamination. 
The leakage chamber and the leakage detector can be cleaned by the seat lifting system. 
Manifolding is one of the applications of these valves in the food-processing industries, especially in the beverage and dairy industries.

 

Принцип работы

When the valve is open the fluid can pass from one body to the other.
Once the valve is closed, the double seat creates an annular chamber that isolates the bodies sealing them with double seals. It allows a CIP operation providing an interface between the two fluids, preventing the possibility of product contamination.
Due to the leakage detector any leak of a seat seal is detected by the appearance of liquid at the bottom of the valve. 
The zone between the poppets and the seats is cleaned by pulsing the individual poppets when the specific line is being cleaned, the poppets are fractionally stroked by two additional limited movement pistons located within the main actuator.
The valve is balanced providing protection against overpressure and hydraulic shock up to 30 bar.

 

Конструкция и характеристики

Compact design.
Valves with normally closed pneumatic actuator.
Weld connections (mm or inches).
Forged spherical bodies.
Balanced design.
Angular orientation 360ºC.
Open lantern allows visual inspection of the sealing.
Easy disassembly by releasing the clamp.
Available from DN 40 - 1 ½" to DN 100 - 4".

Опции

Gaskets: NBR and FPM.
Connections: DIN, SMS, Clamp, RJT, etc.
Conotrol box C-TOP.
Surface finish Ra ≤ 0,5 µm.
Mixed body sizes: combinations of bodies with different diameters.
DSO tank bottom valve.
Heating jacket.
Routing valve, with three bodies.

Материалы

Parts in contact with the product: AISI 316L
Other stainless steel parts: AISI 304
Gasket: EPDM in compliance with FDA 177.2600
Internal surface finish: Ra ≤ 0,8 μm

Документ Скачать Отправить по email
Техническое описание Отправить
Инструкции Отправить
Для того, чтобы воспользоваться формой обратной связи, включите, пожалуйста, javascript в Вашем браузере
закрыть
Пользуясь этим сайтом, вы соглашаетесь с Политикой конфиденциальности Отправить
Для того, чтобы воспользоваться формой обратной связи, включите, пожалуйста, javascript в Вашем браузере
закрыть