Позвоните нам!
введите код - получите скидку

Седельный Клапан Mixproof Cavity Spray

Доставка по Москве и МО бесплатная

Оплата наличными при получении или удобным для вас способом:

Привезем гарантийный талон, товарный и кассовый чеки

Гарантийное обслуживание в авторизованных сервисных центрах

Применение

The Mixproof valve  is a completely hygienic double sealing valve. This system allows for the simultaneous processes in the two bodies of the valve by providing interface between the two fluids, preventing the possibility of product contamination. The leakage chamber and the leakage detector can be cleaned by "cavity spray".  Manifolding is one of the applications of these valves in the food-processing industries, especially in the beverage and dairy industries. 

Принцип работы

When the valve is open the fluid can pass from one body to the other.
Once the valve is closed, the double seat creates an annular chamber that isolates the bodies sealing them with double seals. It allows a CIP operation providing an interface between the two fluids, preventing the possibility of product contamination.
Due to the leakage detector any leak of a seat seal is detected by the appearance of liquid at the bottom of the valve.
The leakage chamber and the leakage detection system are usually cleaned by CIP without interruption of the main process.
The area between the seats is cleaned by the introduction of the CIP fluid from an external source. Nozzles situated near the base of the lower poppet direct jets of CIP fluid onto the leakage chamber wall. The fluid is released down the drain tube.
The valve is balanced providing protection against overpressure and hydraulic shock up to 30bar.

Конструкция и характеристики

Compact design. 
Valves with normally closed pneumatic actuator.
Weld connections (mm or inches).
Forged spherical bodies.
Angular orientation 360ºC.
Balanced design.
Open lantern allows visual inspection of the sealing. 
Easy disassembly by releasing the clamp.
Available from DN 40 - 1½" to DN 100 - 4".

Опции

Gaskets: NBR and FPM.
Connections: DIN, SMS, Clamp, RJT, etc.
Control box C-TOP.
Surface finish Ra ≤ 0,5 µm.
Mixed body sizes: combinations of bodies with different diameters.
Heating jacket. 
DSO option designed for the CIP circuits. 
Routing valve, with three bodies.

Материалы

Parts in contact with the product: AISI 316L
Other stainless steel parts: AISI 304
Gasket: EPDM according to FDA 177.2600
Internal surface finish: Ra ≤ 0,8 µm

Документ Скачать Отправить по email
Техническое описание Отправить
Инструкции Отправить
Для того, чтобы воспользоваться формой обратной связи, включите, пожалуйста, javascript в Вашем браузере
закрыть
Пользуясь этим сайтом, вы соглашаетесь с Политикой конфиденциальности Отправить
Для того, чтобы воспользоваться формой обратной связи, включите, пожалуйста, javascript в Вашем браузере
закрыть
78007077822