Доставка по Москве и МО бесплатная
Оплата наличными при получении или удобным для вас способом:
Привезем гарантийный талон, товарный и кассовый чеки
Гарантийное обслуживание в авторизованных сервисных центрах
Применение
The BMI series comprises a range of vertical agitators with direct drive. They can be used in mixing, dissolution, dispersion, and maintenance processes requiring strong agitation at high speeds, as well as in the food processing, cosmetics, and chemical industries, selecting the appropriate finish in each case.
Applicable to tanks with capacities of up to 10,000 litres, usually with low viscosity products.
Принцип работы
The agitators are usually installed off-centre to prevent product rotation but can also be installed centred in conjunction with deflector baffles in the tank.
The rotating propeller pushes the product towards the bottom of the tank, where it is diverted generating an upward flow along the tank walls so that the product reaches the surface of liquid. This effect is enhanced if the tank has a rounded base.
Конструкция и характеристики
Vertical agitator.
Sealing by means of retainer.
Bearing support.
The propeller is fitted and secured to the shaft and the shaft is secured to the half shaft head by means of allen set screws; in the case of sawtooth turbines a one-piece shaft is used.
Motor IEC B5, 1500 rpm, IP55, class F insulation.
Maximum power 4 kW.
Marine propeller (type 10).
Опции
Sealing by means of single or double mechanical seal depending on application.
FPM retainer ring.
Polymer coated shaft and propeller for corrosive products.
Propeller welded to the shaft and Ra ≤ 0.4 μm and Ra ≤ 0.8 μm surface finish.
Sawtooth turbine (cowles) in AISI 316L.
Motor shroud.
Motors and protections according to requirements.
Материалы
Parts in contact with the product: AISI 316L
Retainer ring: NBR
Bearing support: Aluminium
Base plate AISI: 316L
Surface finish: Ra ≤ 1,6μm
